Commercial Roofing
Home›Services›Commercial Roofing

LOW-SLOPE & FLAT ROOF SPECIALISTS

COMMERCIAL ROOFING

Commercial buildings have different roofing needs than residential homes. We handle TPO, EPDM, modified bitumen, and metal roofing for small to mid-size commercial properties across the Kansas City metro. From single-tenant retail to multi-tenant office buildings, we deliver systems built for low-slope applications with minimal disruption to your operations.

WHY CAPSTONE

WHY CAPSTONE FOR
COMMERCIAL ROOFING

1

Specialised low-slope and flat roof systems (TPO, EPDM, modified bitumen)

2

Work scheduled around your operating hours to minimise disruption

3

Full manufacturer warranties plus our workmanship warranty

SCOPE OF WORK

WHAT'S INCLUDED

Comprehensive roof assessment plus core sample analysis
Detailed scope of work with itemised line-item pricing
Full tear-off, decking repair, and new system installation
All flashings, drains, scuppers, and penetrations sealed and detailed

THE PROCESS

HOW IT WORKS

Simple, transparent, owner-managed from the first call to the final handshake.

01
Commercial Assessment

On-site inspection plus core samples to confirm existing layers. We give you a written report with photos and a clear scope of what's needed and why.

02
System Recommendation

We recommend TPO, EPDM, modified bitumen, or metal based on your building, climate exposure, budget, and warranty goals. No one-size-fits-all.

03
Coordinated Install

We schedule the install around your operating hours and tenant access requirements. Most small commercial projects complete in 2 to 5 days.

04
Final Inspection & Warranty

Punch list walked with you on completion. You receive full warranty documentation registered with the manufacturer plus our workmanship warranty.

Commercial Roofing in Kansas City

How a low-slope commercial roof system is built and sealed

A flat roof isn't truly flat. Low-slope roofs are built with a slight pitch, often using tapered insulation boards, so water runs to drains and scuppers (openings through the parapet wall) instead of ponding. Water that sits more than a couple of days after rain speeds up membrane wear and finds every weak seam.

The membrane is the waterproof layer. TPO is a white single-ply sheet whose seams are welded with hot air into one continuous piece, and the white surface reflects summer sun. EPDM is a black rubber membrane joined with seam tape and adhesive, and it stays flexible in cold weather. Modified bitumen is asphalt reinforced with polyester or fiberglass and applied in layers, which makes it tough under foot traffic. Metal panels suit buildings with a little more slope.

Most leaks start at the details: rooftop HVAC curbs, pipe penetrations, drains, and the edge where the roof meets a parapet wall. Each one is flashed with membrane and sealed on its own, and they get the closest look at final inspection.

Commercial Roofing in Kansas City

Repair, recover or replace a commercial roof in Kansas City

There are three paths. A repair fixes seams, flashing or punctures on a roof that is otherwise sound. A recover installs a new membrane over the existing roof, which can work when the insulation underneath is dry and building code allows it, since codes limit how many roof layers a building can carry. A full tear-off is needed when insulation is wet or the deck is damaged. Core samples tell us which path fits, because wet insulation can hide under a membrane that looks fine.

What changes the cost: square footage, the number of penetrations and rooftop units, insulation thickness, drainage changes, roof access, and the system you choose. A roof crowded with units and pipes takes more detail work than an open roof of the same size. Scheduling around tenants and business hours affects the timeline too.

Kansas City weather works on commercial roofs all year. Hail punctures and bruises membranes, wind lifts poorly fastened edges, freeze-thaw opens cracks in aging modified bitumen, and summer heat ages dark surfaces faster. An inspection after a major storm documents damage while it's fresh, which matters if you file an insurance claim.

GOT QUESTIONS?

COMMERCIAL ROOFING QUESTIONS

Do you do commercial roof inspections in Kansas City?

Yes, Capstone does commercial roof inspections across the Kansas City metro. We walk the membrane, seams, flashing, drains and rooftop units, check for ponding water, and photograph every problem. You get a written report with an itemized scope you can hand to owners or tenants, and we tell you plainly if repair beats replacement.

What commercial roof systems do you install?

Capstone installs four commercial roof systems: TPO, the most common choice for new commercial work, EPDM rubber, modified bitumen, and metal. We do not install built-up roofs or coal tar systems. The right commercial system depends on your building's slope, rooftop traffic, budget, and warranty goals.

What size commercial projects do you handle?

Capstone handles small to mid-size commercial roofing projects, typically 5,000 to 50,000 square feet, such as single-tenant retail and multi-tenant office buildings. For larger industrial or warehouse projects, we can refer you to a specialized commercial partner. Residential roofing remains our main focus, and commercial projects get the same owner-managed attention.

Do you handle warranty work on existing commercial roofs?

Yes, Capstone handles warranty work on existing commercial roofs that we installed. For roofs installed by other contractors, we can inspect and quote a repair, but warranty claims should go through the original installer first, because outside work can affect that warranty. Call us once that path is settled.

Do you work with property managers and building owners?

Yes, Capstone works with both property managers and building owners, including single-property owners who deal with us directly. We schedule commercial roof work around your operating hours and tenant access, provide a written report with photos, and give you an itemized scope of work you can share with owners or tenants.

How long does a commercial TPO install take?

A commercial TPO install on a typical 10,000 to 15,000 square foot single-story building takes 3 to 5 working days. Larger or more complex roofs, with many rooftop units or drainage changes, take longer. Capstone provides a detailed schedule before work starts and plans the install around your operating hours.

Is TPO or EPDM better for a flat roof?

Neither TPO nor EPDM is better for every flat roof. TPO's white, heat-welded membrane reflects summer heat and suits buildings with high cooling loads and rooftop equipment. EPDM rubber stays flexible in cold weather and has a long track record on simple roofs. Capstone recommends one after inspecting your building.

CAPSTONE CONTRACTING SOLUTIONS
CAPSTONE CONTRACTING SOLUTIONS
CAPSTONE CONTRACTING SOLUTIONS
CAPSTONE CONTRACTING SOLUTIONS
CAPSTONE CONTRACTING SOLUTIONS
Capstone Contracting Solutions

GET STARTED TODAY

READY TO GET STARTED?

The best time to fix your roof is before the next Kansas City storm hits. Get started today with a no-pressure consultation and a free roof inspection. Capstone is family-owned, woman-led, owner-managed, and just a click or call away.

GET MY FREE ESTIMATEFast response. Honest guidance. No pressure.

We will never send you unsolicited messages. No obligation. No pressure.

CAPSTONE CONTRACTING SOLUTIONS
CAPSTONE CONTRACTING SOLUTIONS
CAPSTONE CONTRACTING SOLUTIONS
CAPSTONE CONTRACTING SOLUTIONS
CAPSTONE CONTRACTING SOLUTIONS
Call 24/7